- -€3.03
Mr.SUPER CLEAR FLAT B514
€14.99
€11.96
Save €3.03
Tax included
Spray can of matt clear top-coat suited for plastic models (gunpla included, of course!).
The content (170ml) is enough to spray two layers on a 1.53m² area.
Cure time is 30~60 minutes.
To get best results:
- don't employ on humid days;
- shake well before use, and reshake frequently;
- spray at a distance of approx. 20cm, keeping the can in vertical position;
- paint in quick and thin layers and don't stop in the middle;
- don't apply more then required, as to avoid a whitening effect on underlying colors (2 or 3 layers should be sufficient);
- at the end of the painting, turn the can upside down holding the spray nozzle for a couple of seconds in that position, to prevent clogging of the diffuser.
It's compatible with solvent-based acrylic paints. Just allow the colors to cure before using it.
Do not apply on water-based paints.
It can damage decals.
PLEASE NOTE: this item is available for shipping only in Italy!
This is a flat clear, solvent-based, coating product.
It's used to give a matte finish to your models, simultaneously fixing and protecting the paint job you may have done.
As it's contained in a spray can, it's easy and immediate to employ and is also suitable for painting large model parts.
Flammable! Use only in well-ventilated areas and away from heat sources. Avoid exposing the can to direct sunlight or at temperatures above 40°C.
4973028514629
Data sheet
- Material
- Solvent-based paint
- Manufacturer
- GSI Creos
Comments (0)
No customer reviews for the moment.
Customers who bought this product also bought:
A selection of 12 other related items:
Spray can of matt clear top-coat suited for plastic models (gunpla included, of course!).
The content (170ml) is enough to spray two layers on a 1.53m² area.
Cure time is 30~60 minutes.
To get best results:
- don't employ on humid days;
- shake well before use, and reshake frequently;
- spray at a distance of approx. 20cm, keeping the can in vertical position;
- paint in quick and thin layers and don't stop in the middle;
- don't apply more then required, as to avoid a whitening effect on underlying colors (2 or 3 layers should be sufficient);
- at the end of the painting, turn the can upside down holding the spray nozzle for a couple of seconds in that position, to prevent clogging of the diffuser.
It's compatible with solvent-based acrylic paints. Just allow the colors to cure before using it.
Do not apply on water-based paints.
It can damage decals.
PLEASE NOTE: this item is available for shipping only in Italy!