ACTION BASE 2 SPARKLE CLEAR RED

This Action Base 2 has a beautiful futuristic look and is suitable for supporting gunplas in static and dynamic poses.
It's compatible with 1/144 scale and SD (Super Deformed) gunpla models.

The only exception to these rule are explicitly out-of-size models.

This Action Base can be attached to other similar bases to recreate fights between more mobile suits, and the rod can be extended and tilted in various positions: it features joints at the tip and at the base.
The rod can also be used on Action Base 1 display bases (sold separately).

It requires assembly, but glue is not needed.
It's advisable to use a hobby nipper to properly detach the components from the runners.

This base comes with several supports for various gunpla types:

• 1x U-shaped 6 mm wide support;
• 1x U-shaped 7 mm wide support;
• 2x different peg supports;
• 1x screw-on support.

In addition to the screw-on support, the construction involves the use of 2 screws for the assembly of the rod, so you'll need to use a Phillips screwdriver (it's recommended not to over tighten the screws, to avoid risk of plastic damage).

If necessary, the depth of U-shaped holders can be adjusted employing a nipper to cut excess parts off.

Gunpla models shown in the images are sold separately.